- 20A Max & Dry Contact Output: Support to connect 20A Max high load, dry contact output.
- LCD Screen: Real-time monitoring of temperature and humidity data, the screen refreshed every 5S.
- 6-Month Temp & Humi Historical Data by Hours: Support to review the temp & hum history data by hour, day and month. Past 6-month history data can be exported in .xlsx format and accurate to hour.
- Local Automatic Control: Support LAN control, automatic control is more reliable. You can set 8 automatic control programs for you to save electricity bills and create comfortable surroundings.
- Voice Control and Query: Work with Alexa, Google Assistant, you can query temperature and humidity values by your voice.
Notes:
- Note 1: THS01 and DS18B20 are the sensors with RJ11 jacks, designed for use with the TH Elite series. The MS01 comes with a free RJ11 adapter to fit into the TH Elite.
- Note 2: The RL560 is the new sensor extension cable with RJ11, it can connect to a SONOFF temperature and humidity sensor to extend distance from the device. DS18B20, THS01 can be extended to 60M, and MS01 soil moisture sensor can be extended to 10m.
- Note 3: Refer additional note at end.
The SONOFF TH Elite is a Smart Temperature and Humidity monitoring switch based on ESP32. With an LCD screen, TH Elite can be used to monitor the temperature and humidity in real-time and once they reach your preset threshold or the device’s on/off state changes, you will receive a push notification on your smartphone.
The SONOFF TH Elite supports a maximum of 20A, suitable for most high load equipment, e.g. electric floor heating.
In addition, this switch also supports dry contact applications, such as energising a separate contactor for higher load applications. You can therefore use it to replace your traditional thermostat (with dry contact) to control systems triggered by the traditional switch / thermostat.
The TH Elite also maintains 6-month Temp & Humidity history, accurate to the hour.
Smart scene controls include temperature, humidity and on / off as triggers.
This switch also supports Home Assistant for control and automation through the eWeLink add-on.
The following SONOFF sensors are supported by the TH Elite:
- THS01: Temp & Humidity Sensor
- DS18B20: Waterproof Temp sensor
- MS01: Soil Moisture Sensor
- RL560: Sensor extension cable to extend your device’s distance to 60m for the THS01 and DS18B20, or 10m for the MS01 Soil Moisture Sensor .
The connectors of all sensors have been upgraded to RJ11 plug connectors and now support hot-plug in, making the connection more stable and reliable.
THS01 Sensor
- Sensor Type: Temperature & Humidity sensor
- Connector type: RJ11 4P4C
- Temperature Measuring Range: –40℃~+85°C
- Humidity Measuring Range: 0~100%RH
- Cable Length: 50cm
DS18B20 Sensor
- Sensor Type: Waterproof temperature sensor
- Connector type: RJ11 4P4C
- WorkigTemperature: -55℃~+125℃
- Length: 50cm
MS01 Sensor
- Sensor Type: Soil Moisture Sensor
- Humidity Measuring Range: 0~100%RH
- Operating Temperature Range: 0℃~60°C
- Cable Length: 50cm
RL560 Sensor Extension Cable
- Conductor resistance: max.10Ω
- Insulation resistance: min.5MΩ
- Length: 5m cable length & Max. 60m extendable length.
Note:
- No sensors are included with the monitor switch and should be ordered separately.
- This device needs to connect to your 2.4 GHz router for WiFi control.
- If using the TH switches for temperature within certain time periods (e.g. geyser), also ensure to add a schedule “off” after the end of the automation period. There have been instances where the geyser have not switched off at the target time as the pre-requisite temperature had not yet been reached…
- EXAMPLE: If the switch is set to control the geyser between 20:00 and 23:00, also add a “off” schedule for 23:01
