Ewelink wifi module for traditional switches (No Neutral Required)

R200.00

This Ewelink WIFI Module requires no neutral wire at the connection box and is can be used to connect a traditional flip switch in a 220V circuit to enable WiFi / App control.

Availability: In stock

This Ewelink WIFI Module requires no neutral wire at the connection box and is can be used to connect a traditional flip switch in a 220V circuit to enable WiFi / App control.

The switch can be controlled by the traditional switch, the free Ewelink app, Google Assistant, Alexa (voice or app) as well as timer schedules., In addition the power-on state can be set to either on or off when the power is restored after an outage.

The status of the light can be monitored in real time on the app and control of the switch can be shared with specific friends and family.

Smart scenes can be defined on the app to trigger this switch based on actions of other switches or vice versa.

Voice control: is possible via Alexa or Google Assistant and a maximum of 8 single / repeat / countdown timing schedules can be set.

This module is super easy to install and requires no dedicated hub or monthly subscriptions other than your current home WiFi router (2.4Ghz).

Features:

  • 1-gang WiFi module
  • No Neutral Wire required
  • Light can be controlled by the traditional switch and mobile phone APP simultaneously.
  • There is no need to replace the current wall switch. It is economical and affordable.
  • Supports RF433mhz

Specifications:

  • Input: 200-240V AC 50-60hz
  • Wattage: Max 500W
  • Standby power consumption: 0.2W
  • Size: 52*29*20mm
  • Wireless frequency :WIFI 2.4G / RF433Mhz (5G NOT SUPPORTED)
  • APP: eWeLink

Notes:

  1. Requires capacitor to be installed at the light itself across L and N (Capasitor included)
  2. No user guide is included, but support is available if information and pictures are not adequate,
Weight 30 g